I’m tired. I will forever look at big art installations and wonder with silent reverence if there were two people at some point sitting on their couch at three in the morning assembling parts to the thing by hand.
Any how… WE’RE HALF WAY THERE! Two days ago everything came together at last. One by one we tested and plugged the new babies into their happy little nests. We even named a whole pallet after our favorite characters from Create TV, which we’ve had on in the background while doing a lot of the manual labor.
Long story short, Mark fired up his Netbeans GUI and everything just worked. With a little tweaking over the weekend we got the 42 little ones to behave more or less like we were imagining. Mark even figure out how to turn off the stupid thing in the Kinect example code that waits for a hand wave before tracking. This means, it will just follow any hands it sees all on its own. Wish we knew about this last year >.<
After our appearance at the Science and Technology Festival tonight, the countdown resets for the big Maker Faire in a little less than three weeks. We have another six pallets to ready before then… not to mention the challenge of solving exactly how we’re going to get a gang of robots all the way up to Silicon Valley safely.
Wish us luck or something. After May is over I’m going to curl up in a blanket with my soft delta and watch the hobbit… and I don’t mean Mark. 😉
The art beast is a monster that wears its own face as a mask. We’ve gotten acquainted over the years, but as much as I think I know it, at the end of the day there is something else underneath that I can’t see. So in reality, I still know nothing of art.
This past weekend Mark and I got a bunch more work done for the installation. We finished glueing and painting all the shiny black honeycomb pallets, so all twelve of them are now stacked neatly waiting to receive delta babies. …which means we need to build lots… and LOTs of delta babies. Thankfully, as I sit here and write this, that part is mostly done. For the past week or so the living room has transformed into a birthing chamber of plastic bins and Create TV.
At an average of 15-20 minutes a piece, we built around 50ish more base assemblies. That’s the acrylic bit with the three motors attached.
Obviously, they aren’t full deltas yet. They’re missing their snazzy yellow arms and blinky LED on top, but we wanted to get the hard part out-of-the-way first. The next step is to calibrate all of these little delta butts, and then screw all the grey paddles onto the gear hubs. >.< Which will also take a bit of doing.
Mark spent a crap load of time crimping custom cables which will tie the deltas together as one big happy collective consciousness. These will connect a series of relay boards to the individual brain PCBs of each robot:
So yeah, brains…. less exciting, I’m soldering brains again. Boo. With all the other cool things to work on, its monotonous melting all the same pieces over and over to blank PCBs… but alas, it must be done sooner rather than later.
As the brains are tested and flashed with all of the knowledge of how to be a good little inverse kinematic thinking soldier… we’ll be gifting each baby with a brain one by one, and then adding them to their shiny honey comb home to dance the mightiest robot dance.
I even squeezed out some new art which we had sent away to become postcards. We’ll be handing them out wherever we happen to show things at for the rest of the year. I say all of this tantric preparation does sorta feel like jumping out of a plane with a skirt on… so the image is appropriate. PROPAGANDA!
Maker Faire in San Mateo is imminent! Last year my partner Mark and I showed an installation of 30 delta robots which mimicked the physical gestures of people. All of the robots however did the exact same thing… which was impressive if you’ve never seen them before, but hardly to the extent of awesome I have in mind for the project.
Though we’ve been working hard, Light Play still has a long way to go development-wise. Until they’re feeding off neural input and hopping through cities in flocks, I’m continuing to slowly expand our numbers. For now, that number is 84, which doesn’t seem like a whole lot in the face of the thousand I dream of having… yet as I sit on the couch night after night building these little monsters, 84 feels plenty enough to my calloused finger-tips:
This is what takes the most time to assemble. The motors mounted to their acrylic bases:
Hardware: the biggest hardware upgrade we’ve made this year has been to the bases the robots sit inside of. Their honeycomb-shaped pods have been redesigned with frequent transportation in mind seeing as the wooden ones we made last year took a bit of a beating and were awkward to carry. In addition to holding three less delta robots per pod, the new bases are also made from black ABS… which means they mostly disappear in darkness, are lighter, and also a lot more resistant to bangs and dings.- Oh! And holding seven robots instead of ten makes for a nice round shape too!
We had these new honeycombs cut professionally at a metal-fab here in town; well worth the extra money not to have to supervise cutting all the shapes ourselves at SYN Shop. Where we did save some time doing this, there is really no getting around glueing the cut pieces together, so Mark and I have been attaching things with ABS weld in his garage a little each day.
When all is done, we’ll be able to lay out these modular pods to fit whatever space we’re showing in. Our setup for Maker Faire this year will consist of 12 pods that are arranged in something of a dome, like this (but one tier higher):
Software: I mentioned the robots should be doing interesting things. Yes. Imagine, if each delta robot were a blade of grass in a field, and your movements were the wind… every hop, skip and wiggle you made would send ripples of complex rolling patterns through the field as a response. That’s the end goal, and very much Mark’s department.
The robots are networked with the DMX lighting protocol now. They also have a snazzy GUI which Mark designed in Netbeans to simulate and visualize the behavior of the field. We’re still deciding on what type of sensor will be responsible for capturing input.
The use of the Xbox Kinect last year, though it worked marvelously, became a nightmare from hell. It turned our field into an exhibit more than a curiosity and tied us to the booth explaining to thousands of people one by one how to control the flock… To avoid a similar situation… our setup this year will respond to the environment at large. For people walking up and observing, it won’t be immediately apparent whether or not the robots are reacting to them. This will fuel engagement and hopefully allow us more zen time to detach and enjoy the rest of the show.
Robo Wagon: Like Scooby Do, Robot Army is going to have its own touring transportation of sorts. It might not be an actual van… and probably not as cool as the picture- but in the next month we will figure out a more permanent method of packing and hauling our kinetic circus:
With less that six weeks left, it’s crunchy again. I’ll find time to post updates when I can… but for now, back to soldering brains. ❤ Oh yeah, while we build the new homes, the deltas are getting acquainted with noodleFeet in the workroom. DAWWWW:
Robotic Arts 