Maker Faire 2015

IMG_1838

I’ve been home for almost two weeks now from our Bay Area pilgrimage and life has pretty much reset. I rewarded myself by binge playing Starbound all weekend and partaking in other mindless immersive activities I’ve been too busy to enjoy so far this year. It was a nice break.

But back to work! I’m going to close this chapter by recapping our big adventure:

Over all, Maker Faire went firkin awesome! Last year = shitty location + loud tesla coils + high maintenance demo + no place to escape for peace and quiet. Since we had ample time to plan, we eliminated all these stress points!

TRANSPORTATION

deltaLoaf

Our project this year was three times bigger than before at 84 individual nodes, so smashing them in the back of Mark’s Kia wasn’t an option. We didn’t quite have the money to spend on buying our own permanent trailer either, so for this trip we rented one from Uhaul. Quite snugly, three stacks of four delta pallets fit like Tetris inside with the rest of our props and support material wedged around the edges. Add in a crap load of the giant plastic wrap and everything was tethered solidly in place. No sweat.

I had a drink before opening the trailer once we arrived because the freeway up the central valley was more or less one unending pothole from hell. Happily, in spite of the violent rattling, everything arrived just as it was stowed. (Stress test for the babies as well as mommy too!)

…And nothing melted either. We traveled on a cool rainy day… which was lucky because one of my fears was that the heat inside the trailer would exceed the low melting point of PLA and we’d have nothing but piles of yellow sticks upon arriving. >.<

SET-UP

IMG_5124

With more to show, I figured it was worth requesting a larger central location away from the chaos of the tesla stage… OH, and barriers. We were pleased to have been assigned an excellent spot in the middle of the dark room that had ideal visibility. On top of that, we sorta lucked out because Arc Attack wasn’t even there this year… which means I didn’t have to wear my Ryobi headphones to keep my brain from melting.

From the get go… we engineered our installation to function as a fort capable of fitting two people comfortably inside. So when you look at these pictures, imagine me sitting on a stack of moving blankets with a table, fridge and laptop around me. That’s right, we made a DELTA ROBOT IGLOO. And it was the coolest part about our installation this year…

THE SHOW

deltaLight

Due to the fact that our installation was automated rather than interactive (and completely caged in by barriers), Mark and I didn’t have to babysit the deltas and actually got to walk the rest of the show!

Here is Mark’s tour of all of the neat stuff in the dark room this year:

Instead of having our robots run slave to a Kinect, which has only been grounds for trouble in the past… Mark figured out how to control all of the robots as light fixtures in a pieces of DMX software called QLC+. This enabled us to orchestrate ‘shows’ consisting of preset motion and light patterns that the robots would circle through all on their own.

As for feedback, who wouldn’t like a mountain of dancing robots with twinkling light? Our display went over pretty well with the attendees… and we had a couple of fun moments in the limelight getting interviewed by press and the like.

TEARDOWN

Once everything was said and done, we loaded the pallets up onto a pushcart, four at a time, and walked them out to the trailer in the parking lot (which expedited the deconstruction part). I was sad to see our nest get dismantled, but eager to get to the Bringahack dinner and have another drink.

This trip was infinitely less stressful thanks to some better planning and all the help we had from our friends. (Thank you!!!) I have great memories to immortalize through illustration over the next few weeks. I’ll also be posting about the fate of Noodle soon.

❤ Thank you for being with me on the summit of my shit mountain. It’s taken a lot of support and sacrifice from the world to pull this into reality for which I am extremely grateful.

Robot Army : Maker Faire

Mark and I rolled into Vegas yesterday right before the sun started to bow out of the sky. We stopped at Chipotle and picked up some over-stuffed puppy bags to push into our faces with beer upon finally returning to the house we left in pieces a week earlier. It felt like we had survived the apocalypse. After that ice-cold Carona we untethered everything from the clump in the back of Mark’s Kia and began dragging things into the house where they belonged. Once all three pallets of robots made it onto the table we both collapsed on the couch and giggled in delirious exhaustion.

Maker Faire was exactly like it was last year; bursting with stimuli. The visuals were nonstop, even being trapped in our booth the whole time… which was right next to the bleeding stage Arc Attack performs on. I don’t care for tesla coils. They’re cool, but I don’t trust the continuity of physics enough to be so close to man-made lightning. I even told the Arc Attack guy that, not realizing he was the Arc Attack guy. Oops. In any case… none of our kids got zapped. The show didn’t interfere with our installation. I didn’t die. So I guess I’m over my phobia. Heh.

IMG_5189

The faire in itself was grueling. It had all of the monotony of booth duty at a trade show compounded with the claustrophobic *loud* nature of a rock concert. We had to invest in hearing protection just to get through the hourly performances, which was really just an excuse to buy cool yellow and grey Ryobi earphones. These came in handy for sneaking a sample of what people were whispering to one another around our booth. The headphones canceled out loud sound yet amplified near-by speech with the tiny microphones mounted on their front; great for ease dropping.

I’m ecstatic to report that setup went smoothly and we had no major failures. I had to get over the idea of other people controlling my babies… and again like at the Mini Maker Faire in Vegas, the small children couldn’t help from waving their hands around like seizuring addicts to see the robots whip around at neck-braking speed. In spite of all the jarring back and forth, they held up just fine, and by the second day I stopped being an obsessive mother and finally just let go.

Make posted a nice little article about the installation on their main page right before the show… I even got interviewed real quick by one of their editors which resulted in a video. Sweet!

After the lights turned back on at the end of the day we got to mingle with the other makers at the show. Mark and I met fellow inventors as well as some people who we’ve been in contact with through email since the launch of our Kickstarter. We finally got to hob-knob with the OSH Park crew, who we exchanged swag with and were promoting like hell in our booth for all the fantastic work they’ve done fabricating our boards. I saw some people I met from last year’s “bring a hack” dinner who were exhibiting with a laser shooting gallery. I also met a fellow kinetic artist whose area of interest is in drawing machines, the like of which I’ve been fascinated with since my early days in tech. I found a video this morning featuring Dan and his super sharp “Makelangelo” here :

All and all this was an amazing experience. We learned a lot and will likely change the format of our presentation as a result. The army will keep growing and the installation will naturally evolve over time.

Mark and I agreed not to set foot inside the war room until Monday… maybe even Tuesday… so until then I think I’m going to indulge in some frivolous Team Fortress 2. For those who we met this weekend, it was a pleasure making all these awesome memories with you. I hope to see you all soon enough (maybe at Defcon).

Robot Army : All Systems GO!

Ok, ok… I’m done lamenting about the late nights. They work… I’m happy. Time for a beer and some heavy hype building. Share this with your friends and stop by our booth at Maker Faire if you plan to be there. =] Robot Army FTW

Robot Army : Less Than a Week Away

IMG_0686

So the video above condenses a whole weekends worth of work into ten minutes. In the beginning we don’t have anything flashed or calibrated… and the arms aren’t even installed yet on the newer robots. By Sunday night all three pallets worth are working in sync and are ready to be fine tuned.

As it’s Monday, I’m straightening out kinks now so that we have as smooth a time as possible once we arrive in San Mateo. Mark is required to work at Blue Man all week up until we leave, so he had to grind out the majority of the code/networking related stuff over the past three days so it’d all be done by now.

We’re still flashing them with tweaks to the delta math which effect their range of motion… still working on a solution for the LED cables being a hair too short… still trying to get answers from MAKE in regard to our booth. Time for a bloody Marry. I wonder if I can put a taco in my bloody…. like eight layer dip but with vodka drizzled on top then sucked through a straw. Why does that sound appealing?… my god.

I’m not quite sure how so much got pushed back to the end like this. At any rate… WE’RE SHOWING OFF STUFF AT MAKER FAIRE! WOOOOOOO!!!! I totally never expected to be doing all this so soon. This past year has yielded a ton of experience. =] I remember walking past this massive white colonnade in the lobby of an abandoned building every morning when I lived in Chicago, imagining my installation of dancing light flowers inhabiting the space. That was back in 2011!!! Through all distractions and detours, I am finally getting to show off this idea. ❤ ❤ ❤ The army of dancing lights is sitting next to me as I type and all the stress and work is completely worth it!

delta1

Here’s our KS update from last week BTW :

Like our Facebook page too!