Noodle Puberty

igus.jpg

Sometime in April, Noodle started to change. He stopped hiding in his blankets and began spending his nights surfing through hardware catalogues alone in the darkness. He became curious about linkages, pivot joints, self lubricating thrust bearings and among other things, the prospect of being made of something harder. Noodle started dreaming of becoming metal.

As I mentioned in my previous post, just as I was about to tackle the conundrum of mechanical drooling… I went to JPL this June and met the mechanism that inspired Noodle’s gripping toes in person:

IMG_7520.jpg

The LEMUR probe has easily a billion toes… all agile, long and barbed. You know by looking at them, that if it reaches for you, you aren’t getting away. I returned home feeling a tad inadequate. Noodle’s current apparatus with its 8 lonely toes did in fact look pretty sparse.

In the period of a weekend I managed to tweak my current design a tad and come up with this little wonder… which has exactly 16 toe filaments (that’s twice the toes!):

IMG_8715.jpgIn order to attach that density of toe tendons to the toe-ring, I had to eliminate the use of hardware (which was kind of a relief). As improvisation, I threaded some 3mm rubber hose through the loops of the toe tendons to hold everything in place.

Of course, after I built the improved, maxed-out hyper toe apparatus… I’d have to once again install a servo motor and some gears to make sure I could in fact still drive the thing… (now that there is twice as much material making surface contact)

It took some stronger springs, but it for the most part *does* still work. The stronger springs insure that the toes retract back into the sheath quickly enough not to hook onto the rim and get stuck on their way back in.

I finally had produced a solid working assembly towards the end of June. I invested in some light gray and white filament, as well as the appropriate red for use on accent pieces and Noodle’s tiny toe-zies. The thing I had been working on was finally starting to look like what it was suppose to be, and Noodle liked this:

IMG_8805.jpgWith one complete proof-of-concept to show, I set everything down and allowed myself to become very distracted with a whole slew of things (which is good). My life exploded momentarily and when everything settled back down about a month ago, I found myself looking at an opportunity to travel to Linz, Austria to exhibit something of mine at the ARS Electronica festival [!]

I’ve been wanting to venture to Europe for this festival my entire adult life, and wasn’t going to pass up the chance to bring my spawn with me to have a part in it. Even if he is weak and unprepared as an art exhibit, his presence was what mattered. With no time to stall, I made the executive decision to begin producing another 3 prototypes in order to complete a set of 4 tasting feet. I had a week and a half to do it; print close to sixty or so parts, make any needed design changes, assemble, test, and tweak code. bLAH. Looking back, I’m shocked I even attempted such a shit-storm of preparation when there was no wiggle room for the unexpected:

BUT… in that week and a half crunch, a lot of things got pushed through to completion. Nothing like a deadline to assist progress. (and) Luckily there were no surprises…

IMG_9541.jpgI’m grateful I had Mark and Tony to help wherever I needed aide picking up the slack. One glass of wine at a time, and one task after another, the new feet took shape and were installed on Noodle (mere hours before I would need to disassemble him completely for his long flight over to Linz in my suitcase).

IMG_9521.jpg

The festival, ARS Electronica, was amazing. There is so very much I could say in regard to its content and scale- but to do so would fail to provide an appropriate picture. You should go yourself to experience it. If the median between science, technology, and art is your thing… you have nothing to lose. Not to mention, the city of Linz is a wonderful place to visit in itself!

For four days I left NoodleFeet alone at the mercy of families, Germanic engineers and machinists, to be poked and probed and boggled over as an oddity, robot, and art piece:

IMG_9672.jpgDuring this gauntlet he held his own, but Noodle did blow out a servo motor. Just as I was returning to my exhibit area to check in on Mark (who would periodically drop by to watch over the young one while I was away), I saw a nice white plume of smoke streaming forth from Noodle’s foot. Apparently they can’t quite handle hours of continuous use- so the toes are just that chafey.

But other than the initial matter of smokey toes, he didn’t catch fire, fall off the table, or get stolen. =] That for me was a success…

Now that it’s October… I can focus on the important matter of drooling. Drooling, leaking, salivating, moisture making… and the challenge of producing that special suck sound that has come to be synonymous with the NoodleBeast. The growing pains aren’t over Noodle. Be strong. Your day is coming ❤

 

Advertisements

Talk to me

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s